LeSabre V6-231 3.8L VIN A 2-bbl (1984)
![background image](/buick/lesabre/v6-231_3.8l_vin_a_2-bbl/Page-1104001.png)
Output Shaft Bearing/Bushing: Technical Service Bulletins
A/T - Revised Rear Bushing Remove and Install Procedure
Bulletin 90-7200-1
Date Feb. '90
Ref.No. 90-080-7200
Corp.Ref.No. 077103R
SUBJECT:
NEW ON-VEHICLE SERVICE PROCEDURE - REMOVE REAR CASE BUSHING OR REAR EXTENSION BUSHING
MODELS AFFECTED:
ALL 1977 THROUGH 1990 MODELS EQUIPPED WITH THM2004R, THM200C AND THM200 TRANSMISSIONS
BULLETIN COVERS:
A new rear bushing (or rear extension bushing) removal/ installation procedure, that can be performed while the transmission is in the vehicle. This
procedure saves labor time on each of the following transmission models:
THM 200-4R THM 200-C THM 200
Labor savings are different on each model but can be significant.
Figure 1 - Rear Case Extension Bushing Remover And Installer