LeSabre V6-3.8L VIN K (1996)
2.
Electrical connector(s).
3.
Right lower I/P insulator.
Perimeter Lighting Relay
(Refer to Figure 1)
Remove or Disconnect
1.
Right lower I/P insulator, (2) screws, (1) light bulb.
2.
Electrical connector(s).
3.
Slide perimeter lighting relay from multi-use bracket.
Install or Connect:
1.
Slide relay onto bracket.
2.
Right lower I/P insulator, (2) screws, (1) light bulb.
3.
Electrical connector(s).
Remote Function Actuator (RFA) Module
(Refer to Figure 2).
Remove or Disconnect
1.
Right lower I/P insulator, (2) screws, (1) light bulb.
2.
Electrical connector(s).
3.
Slide RFA module from multi-use bracket.
Install or Connect:
1.
Slide RFA module onto bracket.
2.
Right lower I/P insulator, (2) screws, (1) light bulb.
3.
Electrical connector(s).
Multi-Function Chime Control Module (with Y67)
(Refer to Figure 2)
Remove or Disconnect
