LeSabre Estate Wagon V8-307 5.0L (1983)
Clutch: All Technical Service Bulletins
A/T - New Design Selective Washer
Model Year
1983
Bulletin No. 83-140
File In Group 70
Number
18
Date
July '83
SUBJECT:
NEW DESIGN SELECTIVE WASHER
MODELS AFFECTED: 1982 AND 1983 THM 200-C, 200-4R, and 325-4L TRANSMISSION
Beginning in late March, 1983, a new design selective washer went into production that is used on the following parts:
^
Turbine shaft to output shaft - THM 200-C
^
Forward clutch shaft to output shaft - THM 200-4R
^
Input shaft to output shaft - THM 325-4L
NEW DESIGN SELECTIVE WASHER
These new parts are made from a different material and can be identified as shown in illustration.
When servicing any THM 200-C, 200-4R, or 325-4L transmission that requires replacement of the selective washer due to wear or damage, use the
following service procedure:
1.
Inspect the two shafts for wear or damage on the selective washer mating surfaces. If wear or damage is found, replace the shafts to prevent future
wear.
2.
Select the proper selective washer from the following chart:
SELECTIVE WASHER CHART (Front End Play)
Identification
Thickness (mm)
Thickness (in.)
Number
Color
Part Number
1.66 - 1.77
0.065 - 0.070
1
-
8639291
1.79 - 1.90
0.070 - 0.075
2
-
8639292
1.92 - 2.03
0.076 - 0.080
3
Black
8639293
2.05 - 2.16
0.081 - 0.085
4
Lt. Green
8639294
2.18 - 2.29
0.086 - 0.090
5
Scarlet
8639295
2.31 - 2.42
0.091 - 0.095
6
Purple
8639296
2.44 - 2.55
0.096 - 0.100
7
Cocoa Brown
8639297
2.57 - 2.68
0.101 - 0.106
8
Orange
8639298
2.70 - 2.81
0.106 - 0.111
9
Yellow
8639299
2.83 - 2.94
0.111 - 0.116
10
Lt. Blue
8639300
2.96 - 3.07
0.117 - 0.121
11
Blue
8639301
3.09 - 3.20
0.122 - 0.126
12
-
8639302
3.22 - 3.33
0.127 - 0.131
13
Pink
8639303
3.35 - 3.46
0.132 - 0.136
14
Green
8639304
3.48 - 3.59
0.137 - 0.141
15
Gray
8639305
3.
Check the front end play to verify the proper washer selection, following procedures outlined in the service manual. Front end play should be 0.56