Lucerne V6-3.8L (2007)
Fluid Line/Hose: Service and Repair
Transmission Fluid Cooler Hose/Pipe Replacement
Transmission Fluid Cooler Hose/Pipe Replacement
Removal Procedure
1. Disconnect the transaxle oil cooler (TOC) outlet hose from top side of the radiator.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the TOC hose retainer bolt.
4. Position a drain pan below the oil cooler hoses.
5. Disconnect the TOC outlet hose from the transaxle.
6. Disconnect the TOC inlet hose from the transaxle.
7. Disconnect the TOC inlet hose from the radiator.
8. Disconnect the TOC hoses from the radiator support retainer.
9. Remove the TOC hoses from the vehicle.
Installation Procedure
Notice: Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid loss.
