Lucerne V6-3.8L VIN 2 (2006)
6. Install the cross bracket assembly J28467-1A.
7. Hand tighten the cross bracket assembly J28467-1A wing nuts.
8. Install the lift hook J28467-7A through the front engine lift hook bracket. Ensure the hook does not damage the surrounding components.
9. Install the lift hook J28467-7A through the rear engine lift hook bracket. Ensure the hook does not damage the surrounding components.
10. Hand tighten the lift hook wing nuts J28467-34 securely to remove all slack from the engine support fixture assembly.