Lucerne V6-3.8L VIN 2 (2006)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Remove the intake manifold cover.
2. Remove the oil level indicator.
3. Loosen the oil level indicator tube nut.
4. Pull upward and remove the oil level indicator tube.
Installation Procedure
1. Ensure that the lower O-ring seal is in place and lubricate the seal with clean engine oil.
2. Position the indicator tube bracket behind the tube nut and insert the indicator tube into the engine block hole.
3. Push down on the indicator tube ensuring that the tube is fully seated.