Lucerne V6-3.8L VIN 2 (2006)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Oil Seal Replacement
Tools Required
^
J35354-A Seal Installer
Removal Procedure
1. Remove the crankshaft balancer.
2. Important: Use care to avoid damaging the crankshaft front oil seal bore or the crankshaft front oil seal contact surfaces.
Pry out the crankshaft front oil seal with a flat-bladed tool such as a large screwdriver.
3. Inspect the crankshaft balancer and engine front cover for scratches.
Installation Procedure