Lucerne V6-3.8L VIN 2 (2006)
18. Install the CKP sensor and studs.
Tighten the studs to 20 Nm (15 ft. lbs.) plus an additional 40 degrees using J45059.
19. Raise the oil pan into position and snug the oil pan bolts.
20. Install the oil pan-to-engine front cover bolts.
Tighten the bolts to 14 Nm (10 ft. lbs.).
21. Install the oil level sensor.
Tighten the sensor to 20 Nm (15 ft. lbs.).