Lucerne V6-3.8L VIN 2 (2006)
4. Notice: The use of non-GM original equipment wheels may cause:
^
Damage to the wheel bearing, the wheel fasteners and the wheel
^
Tire damage caused by the modified clearance to the adjacent vehicle components
^
Adverse vehicle steering stability caused by the modified scrub radius
^
Damage to the vehicle caused by the modified ground clearance
^
Speedometer and odometer inaccuracy
Important:
^
Replacement wheels must be equivalent to the original equipment wheels in the following ways:
^
The load capacity
^
The wheel diameter
^
The rim width
^
The wheel offset
^
The mounting configuration
^
A wheel of the incorrect size or type may affect the following conditions:
^
Wheel and hub-bearing life
^
Brake cooling
^
Speedometer/odometer calibration
^
Vehicle ground clearance
^
Tire clearance to the body and the chassis
Replace the wheel if the wheel is bent.
5. Replace the wheel if the wheel/nut boss area is cracked.
Identify steel wheels with a 2 or 3-letter code stamped into the rim near the valve stem. Aluminum wheels have the code, the part number, and the
manufacturer identification cast into the back side of the wheel.