Lucerne V6-3.8L VIN 2 (2006)
Fuel Level Sensor: Service and Repair
Fuel Sender Assembly Replacement
FUEL SENDER ASSEMBLY REPLACEMENT
TOOLS REQUIRED
J 45722 Fuel Sender Lock Ring Wrench
REMOVAL PROCEDURE
CAUTION:
-
Refer to Gasoline/Gasoline Vapors Caution.
-
In order to reduce the risk of fire and personal injury that may result from a fuel leak, always replace the fuel sender gasket when
reinstalling the fuel sender assembly.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the rear compartment liner.
3. Remove the fuel sender access hole cover bolts.
4. Remove the fuel sender access hole cover.
