Lucerne V6-3.8L VIN 2 (2006)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder Replacement
Ignition Lock Cylinder Replacement
Removal Procedure
1. Disconnect the battery negative cable.
2. Caution: Refer to SIR Caution.
Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3.
3. Remove the steering wheel.
4. Remove the retaining screw from the lower steering column trim covers.
5. Tilt the trim cover down and slide rearward in order to disengage the locking tabs. Remove the lower steering column trim covers.
6. Remove the retaining screws from the upper steering column trim cover.
7. Lift the trim cover in order to gain access to the lock cylinder access hole (1).
