Lucerne V6-3.8L VIN 2 (2006)
![background image](/buick/lucerne/v6-3.8l_vin_2/Page-7810001.png)
Steering Gear: Service and Repair
Power Steering Gear Heat Shield Replacement
Power Steering Gear Heat Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
1. Remove the stabilizer shaft links.
2. Rotate the stabilizer shaft downwards.
2. Remove the plastic clip from the power steering gear heat shield.
3. Remove the power steering gear heat shield retaining bolts.
4. Remove the power steering gear heat shield.
Installation Procedure
1. Install the power steering gear heat shield.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the power steering gear heat shield retaining bolts.
^
Tighten the power steering gear heat shield retaining bolts to 9 Nm (80 inch lbs.).
3. Install the plastic clip to the power steering gear heat shield.
4. Install the stabilizer shaft links.
5. Lower the vehicle.