Lucerne V6-3.8L VIN 2 (2006)
Rear Knuckle Alignment Link: Service and Repair
Adjustment Link Replacement
^
Tools Required
-
J 24319-B Steering Linkage Puller
Removal Procedure
1. Raise and support the vehicle.
2. Remove the nut from the adjustment link.
3. Use the J 24319-B to separate the adjustment link from the control arm.
4. Remove the exhaust.
5. Remove the rear suspension support.
6. Remove the cam lock nut and the bolt.
7. Remove the adjustment link from the support assembly.