Lucerne V6-3.8L VIN 2 (2006)
1. Install the coil spring and upper strut mount to the J 45400.
2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
3. Install the strut to the coil spring and upper strut mount.
4. Loosely install the strut retaining nut.
Notice: Refer to Fastener Notice in Service Precautions.
5. Use a 45 TORX® socket to hold the strut shaft. Use the J-35669 to install the upper strut mount nut.
^
Tighten the strut mount nut to 85 Nm (63 ft. lbs.).
6. Remove the strut from the J 45400.
7. Install the strut to the vehicle.