Lucerne V6-3.8L VIN 2 (2006)
1. Inspect the scavenge tube (54) for damage and clogging.
2. Install the scavenge tube seal into the case.
3. Install the scavenge tube into the scavenge tube seals located in the case and in the driven sprocket support. Tap the scavenge tube lightly with a
plastic hammer to ensure a tight fit in both seals.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the scavenge tube bolt.
^
Tighten the bolt to 8 - 14 Nm (6 - 10 ft. lbs.).
5. Inspect the case to case extension seal (126).
6. Inspect the case extension mating surface for damage.
