Lucerne V6-3.8L VIN 2 (2006)
1. Install the TOC hoses to the vehicle.
2. Connect the TOC hoses to the radiator support retainer.
3. Connect the TOC inlet hose to the radiator.
4. Connect the TOC inlet hose to the transaxle.
5. Connect the TOC outlet hose to the transaxle.
6. Notice: Refer to Fastener Notice in Service Precautions.
Install the TOC hose retainer and the bolt.
^
Tighten the bolt to 25 Nm (18 ft. lbs.).
7. Lower the vehicle.
8. Connect the TOC outlet hose to the top side of the radiator.
9. Notice: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the
transaxle.
Adjust the fluid level. Refer to the following procedures:
^
Transmission Fluid Checking Procedure
^
Fluid and Lubricant Recommendations
^
Capacities - Approximate Fluid