Lucerne V6-3.8L VIN 2 (2006)
^
A cracked or deformed bearing cage
^
Damaged bushing journals
^
Stripped splines
^
A damaged retainer ring groove
2. Install the drive axle retaining ring (509) and the output shaft differential inboard snap ring (512) onto the output shaft (510).
3. Install the fourth clutch bearing (511) onto the output shaft (510).
4. Hold the front differential carrier in place and carefully install the output shaft (510) into the transmission through the left wheel opening. Extend
the output shaft through the differential side gear.
5. Install the case extension housing.
6. Connect the left drive axle to the transaxle.
7. Fill the transaxle to the proper level. Refer to Fluid Capacity Specifications.
8. Inspect the transaxle fluid level.
9. Inspect for fluid leaks.