Lucerne V6-3.9L (2009)
3. Determine if the EBCM harness (1) has a clip (3) and ground stud (2).
-
If the EBCM harness has a clip (3) and ground stud (2) as shown in the "A" portion of the illustration, proceed to Step 4.
-
If the EBCM harness does NOT have a clip (3) and ground stud (2) as shown in the "B" portion of the illustration, proceed to Step 5.
4. Reposition the EBCM harness clip (3) and secure it to the ground stud (2) as shown in the illustration.
5. Secure the EBCM harness (1) to the frame (3) using a tie strap (2) and two holes in the frame. Refer to the illustration.
6. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
Claim Information
1. Submit a claim using the table below.
2. Courtesy Transportation - For dealers using WINS, submit using normal labor code; for dealers using GWM - submit as Net Item under the repair
labor code.