Lucerne V8-4.6L (2008)
Ground Strap: Service and Repair
Engine Ground Cable Replacement (RPO LD8)
Engine Ground Cable Replacement (RPO LD8)
Removal Procedure
Important:
*
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
*
Always route the replacement cable the same way as the original cable.
1. Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement (See: Body and Frame/Spoilers, Flaps, and
Air Dams/Air Dam/Service and Repair/Front Compartment Sight Shields Replacement).
2. Remove the bolt (1) securing the engine ground cable (2) to the right side body frame rail.
