Lucerne V8-4.6L (2008)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Control Actuator Replacement
Removal Procedure
1. Remove the knee bolster. Refer to Driver Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
2. Remove the steering column trim covers.
3. Disconnect the automatic transmission shift lock control connector.
4. Use a screwdriver to pry the automatic transmission shift lock control from the steering column support assembly.
5. Remove the automatic transmission shift lock control from the steering column.
Installation Procedure
1. Install the automatic transmission shift lock control.
Put the column in the NEUTRAL position.