Lucerne V8-4.6L (2008)
6. Carefully install the thermo element (121) between the two pin and washers (120). The V in the thermo element (121) must contact the thermo
element plate (122).
7. Install the oil pan. Refer to Automatic Transmission Fluid and Filter Replacement (See: Automatic Transmission/Transaxle/Fluid - A/T/Service
and Repair).
8. Fill the transaxle to the proper level. Refer to Fluid Capacity Specifications.
9. Inspect the transaxle fluid level. Refer to Transmission Fluid Check (See: Automatic Transmission/Transaxle/Testing and Inspection/Component
Tests and General Diagnostics/4T65-E - Automatic Transaxle/Transmission Fluid Check).
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
10. Reset the TAP values. Refer to Transmission Adaptive Functions (See: Automatic Transmission/Transaxle/Description and Operation/4T65-E -
Automatic Transaxle/Transmission Adaptive Functions).
