Lucerne V8-4.6L (2008)
Switches - Wiper and Washer Systems/Rain Sensor/Service and Repair) .
3. Install the Vehicle Direction Alert Alarm Warning (VDAAW ) Module. If equipped. Refer to Vehicle Direction Alert Alarm Warning Module
Calibration (See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Collision Avoidance Module/Service and
Repair/Procedures) .
4. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement (See: Body and Frame/Mirrors/Service and Repair/Inside Rearview
Mirror Replacement) .
5. Install the interior windshield pillar garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair) .
6. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair) .
7. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper
Arm/Service and Repair) .
8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
9. Close the hood.
