Park Avenue V6-231 3.8L VIN L SFI (1993)
9.
Attach the passenger inflator module in the J 39401 Passenger Side SIR Module Deployment Fixture using the Flange/Arm Mounting Method or
Stud Mounting Method as appropriate (most applications will work best with the Flange/Arm Mounting Method). Refer to Figure 3. Inflator
module must be mounted such that the bag will deploy upward. SECURELY HAND-TIGHTEN ALL FASTENERS PRIOR TO DEPLOYMENT
Important:
When using the Stud Mounting Method, the mounting nuts for attaching the inflator module to the vehicle must be removed from the module. J
39401-1 Mounting Nuts (4 required) MUST be used to attach the module to the fixture to ensure sufficient thread engagement. When using the
Flange/Arm Mounting Method, use the J 39401-13 Hold-Down Nuts (4 required) whenever possible. However, if clearance re-strictions do not allow
the use of the J 39401-13 nuts, (4) M6 x 1.0 nuts with washers may be used.