Park Avenue V6-3.8L SC VIN 1 (2005)
Antenna Control Module: Service and Repair
Antenna Module Coil Replacement
ANTENNA MODULE COIL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the right sail trim panel.
2. Disconnect the body harness from the module.
3. Remove the bolt (2).
4. Disengage the tab on the module (1) from the slot in the sail panel.
INSTALLATION PROCEDURE
1. Engage the module tab in the slot.
2. Align the module hole for the bolt (2).Rotate downward the module (1).
3. Install the bolt (2) for the antenna ground coil module.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 7.5 N.m (66 lb in).
4. Connect the body harness.
5. Install the sail trim panel.
