Park Avenue V6-3.8L SC VIN 1 (2005)
Washer Fluid Level Switch: Service and Repair
WASHER SOLVENT CONTAINER LEVEL SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Disconnect the electrical connector from the washer solvent container level sensor.
3. Using 2 flat-bladed tools, gently pry upward, the level sensor from the washer solvent container.
Remove the washer solvent level sensor from the washer solvent container.
INSTALLATION PROCEDURE
1. Position the washer solvent level sensor grommet to the washer solvent container.
2. Install the washer solvent level sensor into the washer solvent container.
IMPORTANT: The tab on the washer solvent level sensor must be aligned with the slot in the hole on the container.
3. Connect the electrical connector to the level sensor.
4. Fill the washer solvent container with washer solvent.
5. Secure the washer solvent container cap.
6. Verify the wiper washer system operation.