Park Avenue V6-3.8L SC VIN 1 (2005)
Negative: Service and Repair
Disconnect/Connect Procedure (Top Post)
BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE (TOP POST)
REMOVAL PROCEDURE
1. Turn OFF all the lamps and accessories.
2. Make sure the ignition switch is OFF.
3. Disconnect the negative battery cable from the negative battery post.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Clean any existing oxidation from the contact face of the battery post and battery cable using a wire brush before installing the
battery cable to the battery post.
Connect the negative battery cable to the negative battery post.
Tighten the battery cable nut to 6 N.m (53 lb in).
The radio incorporates electronic memory for the clock and pre-selected radio stations, reprogramming is not necessary.
