Park Avenue V6-3.8L VIN K (1995)
Master Cylinder Reservoir Hose
Fig. 51 Pressure Modulator Valve (PMV) Replace
REMOVE OR DISCONNECT
1. Air cleaner assembly.
2. Negative battery cable.
3. Electrical connectors to PMV assembly.
-
Fluid level switch.
-
Pump motor.
-
Valve block.
4. Clamp on reservoir hose to PMV reservoir. Obtain a 15.5 mm (5/8 in.) plug to be used in Step 5.
5. Reservoir hose from PMV reservoir and plug hose to prevent escape of brake fluid.
6. Primary and secondary brake pipes from PMV assembly.
7. Brake pipes from PMV assembly.
8. Harness strap.
