Park Avenue V6-3.8L VIN K (1995)
b. Tighten bleeder valve, and slowly release brake pedal.
c. Wait 15 seconds, then repeat the sequence, including the 15 second wait, until all air is removed. You might have to repeat the sequence 10 or
more times to remove all the air.
TIGHTEN
-
Wheel cylinder bleeder valve to 10 Nm (88 lb. in.).
-
Caliper bleeder valve to 13 Nm (115 lb. in.).
9. Install bleeder valve caps.
10. Lower vehicle.
11. Fill master cylinder to full mark.
12. Check brake pedal for "sponginess". Repeat entire bleeding procedure to correct "sponginess".
