Park Avenue V6-3.8L VIN K (1995)
Radiator: Service and Repair
RADIATOR
REMOVAL
1. Negative battery cable.
2. Engine coolant.
3. Upper fan mounting bolts.
4. Upper radiator panel.
5. Coolant hoses from radiator and coolant recovery tank hose from radiator neck.
6. Fan connector.
7. Transaxle oil cooler lines from radiator side tank.
8. Radiator from vehicle.
INSTALLATION
1. Radiator in vehicle, locating bottom of radiator in lower mounting pads.
2. Radiator to radiator support attaching clamp and bolts.
TIGHTEN
^
Radiator to radiator support bolts to 10 Nm (88 inch lbs).
3. Transaxle oil cooler lines.
TIGHTEN
^
Transaxle oil cooler lines to 27 Nm (20 ft. lbs.).
4. Coolant hoses to radiator.
TIGHTEN
^
Clamps to 2 Nm (15 inch lbs.).
5. Upper radiator panel.
6. Coolant recovery hose to radiator neck.
7. Fan assembly and fan attaching bolts.
TIGHTEN
^
Fan bolts to 9.5 Nm (84 inch lbs.).
8. Fan connector.
9. Engine coolant.
10. Negative battery cable.
11. Check for leaks.
