Park Avenue V6-3.8L VIN K (1995)
INSPECT
^
All components for wear and/or damage.
INSTALL OR CONNECT
^
If the pistons have not been moved in the engine, go to Step 3, otherwise Step 1.
^
If the balance shaft timing has been disturbed, refer to "Balance Shaft."
1. Turn crankshaft so that number one piston is at top dead center.
2. Turn camshaft so that with sprocket temporarily installed, timing mark is straight down.
3. Assemble timing chain on sprockets with timing marks in their closest together position.
4. Timing chain and sprocket.
5. Camshaft sprocket bolt.
TIGHTEN
^
Bolt to 100 Nm + 90° (74 lb. ft. +90°).
6. Timing chain damper.
TIGHTEN
^
Special bolt to 19 Nm (14 lb. ft.).
7. Front cover.
