Park Avenue V6-3.8L VIN K (1995)
Blower Motor: Service and Repair
BLOWER MOTOR
Blower Motor And Fan
REMOVE OR DISCONNECT
1. Nuts and cross brace bar.
2. Electrical connector from blower motor.
3. Cooling tube from blower motor.
4. Screws attaching blower motor to heater and A/C module assembly.
5. Blower motor and fan from vehicle.
INSTALL OR CONNECT
1. Blower motor to heater and A/C module assembly attaching screws, after positioning blower motor.
-
Tighten Screws to 0.6 Nm (5 lb. in.).
2. Cooling tube to blower motor.
3. Electrical connector to blower motor.
4. Cross brace bar and nuts.
-
Tighten Nuts to 25 Nm (18 lb. ft.).