buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Circuit Operation|Page 12792 > < Chart #1 Cornering Lamps Inoperative|Page 12789
Page 1
background image

Cornering Lamp: Initial Inspection and Diagnostic Overview
Circuit Operation

Voltage is applied to the Turn/Hazard Switch Assembly with the Ignition Switch in "RUN," "BULB TEST" or "START." The LH cornering Lamp is
permanently grounded to G202 (Oldsmobile H) or G104 (Oldsmobile C and Buick). The RH Cornering Lamp is permanently grounded to G201
(Oldsmobile H) or G105 (Oldsmobile C and Buick).

When the Turn/Hazard Switch is in either "LEFT TURN" or "RIGHT TURN," the corresponding lamp lights.

Circuit Operation|Page 12792 > < Chart #1 Cornering Lamps Inoperative|Page 12789