Park Avenue V6-3.8L VIN K (1995)
If retainer is correct but does not hold, the opening is too wide. Rework retainer with a flat-bladed screwdriver. Place tip of screwdriver
between plastic molding and lower metal edge of retainer (see Figure 4). Pry upward a small amount (0.5 mm - 0.75 mm) to close opening.
Repeat procedure along full length. Reinstall per Step 2 and check retention per Check Methods 1 and 2.
c. It either of the two conditions exist, replace pushpin. Remove old pushpin, install new pushpin by pushing pin through rubber skull cap hole into hole
in frame until fully seated. Check for snug fit.
Parts Information
Window Kit - Front Door
Model
P/N
Buick Park Avenue/
12371632-33
Pontiac Bonneville
Buick LeSabre
12371636-37
Oldsmobile Ninety Eight
12371640-41
Oldsmobile Eighty Eight
12371644-45
Window Kit - Rear Door
Model
P/N
Buick LeSabre/Park Avenue
12371638-39
Oldsmobile Ninety Eight
12371642-43
Oldsmobile Eighty Eight
12371646-47
Pontiac Bonneville
12371648-49
Pushpins
Model
P/N
All Models
20538173
Parts are currently available from GMSPO.
Warranty Information