buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Underhood Electrical Center or Junction Block Replacement|Page 898 > < Underhood Electrical Center or Junction Block Replacement

Rainier 2WD L6-4.2L VIN S (2005)

Page 2
background image

7. Remove the junction block bracket retaining bolts (1) and remove the junction block bracket from the vehicle.

INSTALLATION PROCEDURE

1. Position the junction block bracket and install the bolts (1).

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the junction block bracket bolts to 6 N.m (53 lb in).

2. Align the wiring harnesses and install the fuse relay center.

Underhood Electrical Center or Junction Block Replacement|Page 898 > < Underhood Electrical Center or Junction Block Replacement