Rainier 2WD V8-5.3L VIN P (2004)
Air Bag(s) Arming and Disarming: Service and Repair
SIR Disabling and Enabling Zone 6
SIR DISABLING AND ENABLING ZONE 6
DISABLING PROCEDURE
IMPORTANT: Refer to SIR Disabling and Enabling Zones before disabling the SIR system.
1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates.This is normal operation and does not indicate
an SIR system malfunction.
4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.
5. Remove the RF door trim panel.
6. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the bottom right of the
door.
7. Disconnect the side impact sensor yellow 2-way connector (5) located near the bottom right of the door.
ENABLING PROCEDURE