Rainier 2WD V8-5.3L VIN P (2004)
Sun Visor: Service and Repair
Sunshade Replacement
Removal Procedure
1. Remove the windshield garnish molding.
2. Release the front assist handle from the headliner. Refer to Assist Handle Replacement.
3. Recline the bucket seat and release the upper portion of the center pillar trim panel. Refer to Garnish Molding Replacement - Center Pillar.
4. Open and rotate the sunshade parallel to the side window.
5. Insert a small tool into the bezel access hole (1).
Important: Midway through the rotation cycle, the tool will move further into the access hole.
6. Push upward on the tool while rotating the sunshade parallel to the windshield. The sunshade pivot arm bezel should appear to be recessed into the
bezel.
Important: Ensure the pivot arm is recessed into the bezel before removing the sunshade from the headliner.
7. Apply outboard pressure to the sunshade while the sunshade is parallel to the windshield.