Rainier 2WD V8-5.3L VIN P (2004)
Seat Cushion: Service and Repair
Seat Cushion Latch Release Assembly Replacement - Rear No. 1 (Short Wheelbase)
SEAT CUSHION LATCH RELEASE ASSEMBLY REPLACEMENT - REAR NO. 1 (SHORT WHEELBASE)
REMOVAL PROCEDURE
1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the rear-seat cushion cover and the pad.
3. Remove the strap (1) from the rear seat cushion latch (2).
4. Remove the 3 bolts securing the rear seat cushion latch to the seat pan.
INSTALLATION PROCEDURE
1. Install the 3 bolts securing the rear seat cushion latch to the seat pan.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat cushion latch release bolts to 10 N.m (88 lb in).