Rainier 2WD V8-5.3L VIN P (2004)
Brake Rotor/Disc: Service and Repair
Brake Rotor Replacement - Front
The content of this article reflects the changes identified in TSB 03-05-23-002A
Brake Rotor Replacement - Front
Removal Procedure
Tools Required
^
J 42450-A Wheel Hub Cleaning Kit
Caution: Refer to Brake Dust Caution in Service Precautions.
1. Inspect the brake fluid level in the brake master cylinder reservoir.
2. If the brake fluid is midway between the maximum-full point and the minimum allowable level, no brake fluid needs to be removed from the
reservoir before proceeding.
3. If the brake fluid level is higher than midway between the maximum-full point and the minimum allowable level, using a appropriate tool, remove
the brake fluid to the midway point before proceeding.
4. Raise the vehicle.
5. Remove the tire and wheel assembly.