Rainier 2WD V8-5.3L VIN P (2004)
Steering Mounted Controls Transmitter: Service and Repair
Steering Wheel Control Switch Assembly Replacement
Removal Procedure
1. Remove the steering wheel.
2. Remove the shroud retaining screws from the back of the steering wheel.
3. Remove the shroud from the steering wheel.
4. Position a blunt ended tool into the wire harness cavity (1) and apply moderate pressure in order to partially remove the steering wheel control
switch from the steering wheel.
5. Disconnect the steering wheel control switch electrical connector.
Important: The bulbs in the steering wheel control switches are not serviceable. The switches should be replaced only as an assembly.