Rainier 2WD V8-5.3L VIN P (2004)
6.
Install the J 29714-A.
7.
Compress the servo cover with J 29714-A.
Important:
Flat-faced servo cover retaining rings that have been removed when servicing a transmission for any reason should not be re-used.
8.
Remove the servo cover retaining ring.
9.
Install the new round wire servo cover ring, P/N 24232065.
10.
Remove J 29714-A.
11.
Clean the servo cover area with Brake Clean and shop air.
12.
Lower the vehicle.
13.
Fill the transmission to the proper level with DEXRON(R)III transmission fluid. Refer to the appropriate SI Document.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.