Rainier 2WD V8-5.3L VIN P (2004)
Shift Solenoid: Service and Repair
2-4 Servo
2-4 Servo
Removal Procedure
^
Tools Required
-
J 29714-A Servo Cover Depressor
1. Raise the vehicle.
2. Support the transmission with a suitable jack.
3. Remove the transmission support.
4. Remove the front exhaust pipe assembly.
5. Remove the heat shield if equipped.
6. Carefully lower the transmission to gain access to the 2-4 Servo.
7. Install the J29714-A.
8. Tighten the bolt in order to compress the servo cover.
9. Remove the servo cover retaining ring.
10. Remove the J29714-A.