Rainier AWD L6-4.2L (2007)
Ignition 1 Signal
-
The scan tool displays 6-18 Volts. The ECM/PCM monitors the Ignition 1 signal circuit in order to determine the system voltage.
Reduced Engine Power
-
The scan tool displays Active or Inactive. Active is displayed when the ECM/PCM detect a fault in the TAC System.
TCC/Cruise Brake Pedal Switch
-
The scan tool displays Applied or Released. The ECM monitors the TCC brake switch/cruise control release signal circuit. An open switch is
displayed as Applied.
Traction Control Signal
-
This parameter displays the current status of the Traction Control System (TCS). The scan tool will display Active if the TCS operating. The scan
tool will display Inactive if the TCS is not requested because of a wheel slippage condition.
Traction Control Status
-
This parameter displays the current status of the Traction Control System (TCS). The scan tool will display Active if the TCS operating. The scan
tool will display Inactive if the TCS is not requested because of a wheel slippage condition.
Vehicle Speed Sensor
-
The scan tool displays 0 to 255 km/h (158 mph). The ECM/PCM monitors the vehicle speed sensor (VSS) signal circuit in order to calculate the
vehicle speed for display.
Scan Tool Data List
Scan Tool Data List
