Rainier AWD L6-4.2L (2007)
Disconnect the plastic barbed fitting (1) from the air inlet panel washer hose (2) as shown above. Using a pair of pliers, remove the plastic barbed fitting
from the front washer hose and discard.
The new windshield washer check valve may be installed in any direction.
Install the new windshield washer check valve, P/N 24024822, to the front windshield washer hose.
Install the air inlet panel washer hose to the other end of the new windshield washer check valve.
Install the front windshield washer hose back into the radiator surge tank retainer.
Close the hood.
Verify the proper operation of the windshield washers.
Parts Information
Warranty Information (excluding Saab U.S. Models)
For vehicles repaired under warranty, use the table.
Warranty Information (Saab U.S. Models)
