Rainier AWD L6-4.2L VIN S (2005)
Auxiliary Step / Running Board: Service and Repair
Assist Step Support Bracket Replacement
Assist Step Support Bracket Replacement
Removal Procedure
1. Remove the bolts that retain the assist step support brackets to the body.
2. Remove the assist step assembly from the vehicle.
3. Place the step assembly on a clean, prepared surface.
4. Remove the nuts (1) that retain the assist step to the support brackets.
5. Remove the support brackets from the assist step.
Installation Procedure
1. Position the assist step to the support brackets.
Notice: Refer to Fastener Notice in Service Precautions.
Install the nuts (1) that retain the assist step to the support brackets.
Tighten the nuts to 25 N.m (18 lb ft).
