Rainier AWD L6-4.2L VIN S (2005)
3. Install the new inner shaft seal using the J45225 (2) and the J8092 (1).
4. Install the differential carrier assembly.
5. Install the bearing (print side out) using the J45232 (2) and the J8092 (1).
6. Inspect the alignment mark between the differential bearing adjuster and the differential carrier assembly case. If the line between the differential
bearing adjuster and the differential carrier assembly case is not aligned, re-align the 2 components as necessary.
7. Install the new inner shaft seal using the J45225 (2) and the J8092 (1).
8. Install the left wheel drive shaft.
9. Fill the differential carrier assembly with axle lubricant. Use the proper lubricant.
10. Lower the vehicle.
