Rainier AWD V8-5.3L VIN P (2004)
1. Ensure that the retaining clips are securely installed on the back side of the rear floor front trim panel.
2. Lift up on the front edge of the cargo mat and slide the rear floor trim panel into position.
3. Position the rear floor front trim panel so that the fasteners align with their respective holes.
4. Install the rear floor front trim panel by pressing the retaining clips and fasteners into the sheet metal openings.
5. Install the rear floor front trim panel end covers by pressing them in place.
6. Install the pushpin in each rear floor front trim panel end cover by pushing the pin into the hole and screwing in the retainer pin.