Rainier AWD V8-5.3L VIN P (2004)
Sunroof / Moonroof Motor: Service and Repair
Sunroof Motor/Actuator Initilization/Teach Process
SUNROOF MOTOR/ACTUATOR INITILIZATION/TEACH PROCESS
SYNCHRONIZATION PROCEDURE
1. Press the sunroof switch to the OPEN position until the window stalls at the rear hard-stop in the fully open position. Release the button.
IMPORTANT: Perform the initialization/teach procedure any time that the sunroof motor is removed from the sunroof module. Ensure that the
electrical harness on the headliner is connected to the sunroof.
2. Within 6 seconds, press the Open switch again. After 3 more seconds, the sunroof window will move toward the close position.
3. Continue holding the switch until the sunroof window stops at the closed position. Release the button. The initialization/teach procedure is
complete.
4. Verify the operation of the sunroof.