Rainier AWD V8-5.3L VIN P (2004)
7. Remove the screws securing the seat cushion trim panel to the seat frame.
8. Remove the seat cushion trim panel.
INSTALLATION PROCEDURE
1. Install the screws securing the seat cushion trim panel to the seat cushion assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat cushion trim panel screws to 2 N.m (18 lb in).
2. Install the seat cover J-strips (1) to the seat cushion trim panel (2).
3. Install the two bolts (2) securing the support (1) to the seat cushion trim panel.