Rainier AWD V8-5.3L VIN P (2004)
1. Install the radiator.
2. Install the condenser to the radiator retaining tab.
3. Install the coolant recovery line to the radiator.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
4. Install the bolts retaining the condenser to the radiator.
^
Tighten the bolts to 28 Nm (21 ft. lbs.).
5. Install the headlamp housing panel.
6. Install the cooling fan and shroud.
7. Install the inlet radiator hose to the radiator.
8. Reposition the inlet radiator hose clamp (1) using J 38185.
9. Raise the vehicle.
10. Install the outlet radiator hose (1) to the radiator.