buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Blower Motor Switch > < Lower Left|Page 8603
Page 1
background image

Ambient Temperature Sensor / Switch HVAC: Service and Repair
Upper Right

AIR TEMPERATURE SENSOR REPLACEMENT - UPPER RIGHT

REMOVAL PROCEDURE

1. Remove the radio. 

2. Disconnect the electrical connector (2) from the air temperature sensor-upper right (1).
3. Remove the air temperature sensor-upper right (1) by turning the sensor clockwise and pulling out.

INSTALLATION PROCEDURE

1. Install the air temperature sensor-upper right (1).
2. Connect the electrical connector (2) to the air temperature sensor-upper right (1).
3. Install the radio. 

Blower Motor Switch > < Lower Left|Page 8603